Cabinet refacing keeps the existing cabinet boxes in place and replaces everything you see: doors, drawer fronts, hardware, and a matching veneer over the exposed frame ends. The layout does not change. The plumbing does not move. That is the whole reason refacing is faster and less disruptive than a full kitchen tear-out, and it is also the reason it is the wrong answer for some kitchens. The deciding factor is the condition of the boxes. A great many Ceres kitchens sit in houses built through the 1970s and again in the 2000s, and box quality across those two eras is not the same. Older boxes are frequently solid plywood carcasses that will outlast their doors by decades, which makes them ideal refacing candidates. Some later builder-grade boxes are particleboard that has already swelled at the sink base from a slow supply leak, and refacing a swollen box just puts a new door on a failing cabinet. We open the sink base first, check the floor of it, check whether the boxes are still square, and tell you plainly which category yours fall into. If the boxes are sound, refacing gives you a new kitchen face for a fraction of the disruption. If they are not, we say so rather than taking the easier sale.
The sequence is short. We measure every opening, confirm the door style and hardware, and order to those measurements. Fabrication lead time is the longest part of the project and it happens before anyone comes back to your house. Installation is typically a matter of days, not weeks, because no walls open and no lines move. Refacing that does not alter the structure or the plumbing generally does not trigger a building permit in Ceres, since the city treats cosmetic finish work as the exception to its permit rule. If your project grows past that line, we tell you before we start rather than after.

Establishes whether the existing boxes are square, solid and worth keeping.
Sets the new look, the hardware pattern and how the doors sit.
Compares the two paths on your actual cabinets rather than in general.
Proudly serving Ceres, Riverbank, Hughson, Waterford, Keyes and Empire for years.
Ten services, all of them kitchen or bathroom work. Cabinet refacing, countertop installation and walk-in tub replacement are the fastest projects on this list. Full bathroom renovations, kitchen remodels and ADU conversions are the ones that carry permits, inspections and a longer schedule. Start with whichever matches what you are actually trying to change.

Riverbank, Hughson, Waterford, Keyes and Empire sit within about twelve miles of Ceres, and no two of them handle a remodel permit the same way. Two run their own building departments, one contracts plan review out, and two are unincorporated and go to the County. We work all five regularly enough to know which applies.
Frequently Asked Questions
Kitchen and Bathroom Remodeling can be complex, and we’re here to provide answers to common questions. Here are some frequently asked questions from our clients.
There is no single price for a Ceres bathroom remodel. Cost follows whether the fixtures stay where they are, whether the supply and waste lines behind the wall get replaced, and how wide the permit scope turns out to be. A refresh inside the existing footprint and a remodel that relocates the drain are not comparable jobs. We price after a walkthrough, not before one.
Usually yes. The City of Ceres treats almost any change to a structure as permit work, with cosmetic finishes such as paint, wallpaper and floor coverings as the exception. Replacing a vanity in place may stay under that line, while moving a drain or opening a wall does not. We confirm scope with the Building Division before demolition so the answer is settled in advance.
Schedule follows the permit and inspection sequence, whether fixtures move, and lead times on tile and glass. Ceres permit applications route through the Stanislaus County online portal, and the Building Division counter runs limited hours on Mondays, which is worth planning around. We set the sequence at the walkthrough and tell you where the waiting points are.
Kitchen cost turns on how much of the room moves. Refacing sound cabinet boxes and replacing countertops is a different project from relocating plumbing and gas lines for a new layout. Appliance and cabinet lead times affect the schedule more than most homeowners expect. We scope the room first, then price it.
An accessory dwelling unit is a second, self-contained living space on a lot that already has a house. Ours is conversion work: turning existing square footage into a unit with its own kitchen and bathroom. Stanislaus County publishes free detached ADU plan sets built to the 2025 California Building Code, which is a real head start on the drawings. Whether your lot and structure qualify is a site question we answer at the walkthrough.
Ask who is pulling the permit and whether they have pulled one in your city before, because Ceres, Hughson, Riverbank, Keyes and Empire do not handle it the same way. Ask what happens when something unexpected turns up behind the wall, and get the answer in writing. Ask whether the quote covers the whole scope or just the visible part of it.
Refacing costs meaningfully less than full replacement because the boxes, layout and plumbing all stay put, and the labour is a fraction of a tear-out. The gap narrows if your kitchen needs a layout change anyway. We quote both paths after looking at your boxes so you are comparing real numbers on your kitchen rather than averages.
No. Refacing needs boxes that are structurally sound and still square. Water damage at the sink base, swollen particleboard, or racked frames all rule it out. We check the sink base and the frame condition before recommending it, because refacing a failing box is money spent on a cabinet that will still need replacing.
Refacing on its own is finish work and generally sits on the cosmetic side of the City of Ceres permit rule, alongside paint and floor coverings. That changes the moment the project touches plumbing, gas or electrical, or moves a wall. We confirm which side your project falls on before starting.
Most of the calendar time is fabrication lead time on the doors and fronts, which happens off-site. On-site installation is usually a few days because nothing structural opens up. Your kitchen stays broadly usable throughout, which is the practical advantage over a full replacement.
Get Your Ceres Cabinets Assessed
We pride ourselves on delivering great results and experiences for each client. Hear directly from home and business owners who’ve trusted us with their Kitchen and Bathroom Remodeling needs.

Our shower pan had been leaking into the subfloor for months before we called anyone. They found the damage the same week, converted the tub to a walk-in shower, and handled the inspection without us chasing anyone. Our Mayfield house is from the late seventies and nothing behind that wall was standard.
Rosa M.

We did a full kitchen remodel on a place off the Richland corridor. What sold us was that they put every single change in writing before touching anything, so there were no surprise line items at the end. The cabinet layout they proposed used the awkward corner we had written off.
Anthony D.

We asked about refacing our cabinets and they told us the boxes were sound and refacing was all we needed, rather than selling us a full replacement. Straightforward people. They also explained why our fixtures were scaling up the way they were with the water here.
Priya S.
Ready to hear more about expert services at ?
Contact us today to receive a detailed, no-obligation quote.